5.13 Logging Out And Switching The Instrument Off - Qiagen EZ2 Connect MDx User Manual

If no USB drive is inserted the following is displayed:
Figure 141. USB drive not inserted.
Insert a USB drive and attempt the process again.

5.13 Logging out and switching the instrument off

To log out of the Software, tap the Log out button on the toolbar.
To switch the instrument off, press the power button.
Important: It is not recommended to switch the instrument off when a protocol run, maintenance
procedure, or file transfer are in progress. This could result in damage to the instrument and samples
and/or data may be lost.
Figure 142. Location of the Log out button.
EZ2 Connect MDx User Manual 05/2022 138