5.5
Canceling the protocol run setup
You can cancel the protocol run setup process at any time. If you cancel the run setup, your progress
is not saved, and the worktable does not move. If you have loaded anything onto the worktable,
remove the labware.
To cancel the setup, tap Cancel. In the Cancel run setup dialog, tap Yes to confirm the cancellation,
or tap No to go back to the run setup.
Figure 118. The Cancel run setup dialog.
5.6
Starting the protocol run and monitoring its progress
After successfully completing all the steps of the protocol run setup, you can start the run. During
the protocol run, you can monitor its progress. Ongoing steps, an estimated run time, and the
elapsed run time are displayed on the screen.
EZ2 Connect MDx User Manual 05/2022
118