Power Button; Usb Ports - Qiagen EZ2 Connect MDx User Manual

3.2.3

Power button

The power button is located on the front of the EZ2, on the bottom right corner. To turn on the EZ2,
press the button. After you press the button, the power button lights up, the startup screen appears
on the touchscreen, and the instrument initializes.
To save energy, the EZ2 can be turned off when not in use. To turn off the EZ2, press the power
button.
Figure 5. Location of the power button.
3.2.4

USB ports

The EZ2 has 3 USB ports. One is located next to the power button, on the front of the instrument.
Two are located on the back of the touchscreen display.
The USB ports allow you to connect a USB drive to the EZ2. A USB drive that is connected to the
instrument can be used to, for example, transfer report files. For more information on saving reports,
refer to the instructions provided in the Saving a run report section (see page 128).
In addition, you can use the USB drive to upload protocols, or update the software, if you have the
relevant files on your USB drive. For more information on uploading protocols, refer to the Installing
new protocols section (5.3.6). For more information on software updates, refer to the Updating
software section (see page 82).
EZ2 Connect MDx User Manual 05/2022 30