Waste Disposal; Mechanical Hazards - Qiagen EZ2 Connect MDx User Manual

2.6

Waste disposal

Used consumables, such as reagent cartridges and disposable filter-tips, may contain hazardous
chemicals or infectious agents from the purification process. Such waste must be collected and
disposed of properly, according to local safety regulations.
For information about how to dispose of the EZ2 instrument, see Appendix A: Waste Electrical and
Electronic Equipment (WEEE).
CAUTION Hazardous chemicals and infectious agents
Waste may contain toxic or infectious material and must be disposed of
properly. Refer to your local safety regulations for proper disposal
procedures.
2.7

Mechanical hazards

The hood of the EZ2 must remain closed during operation of the instrument. Only open the hood
when instructed to do so by the instruction for use or when prompted by the GUI.
The worktable of the EZ2 instrument moves during operation of the instrument. While loading the
worktable, always stand clear of the instrument. Do not lean on the worktable when the pipetting
unit of the instrument is moving to reach loading position with its lid open. Wait until the pipetting
unit completes its movements before you start to load or unload.
WARNING Moving parts
To avoid contact with moving parts during the operation of the EZ2, the
instrument must be operated with the hood closed.
The hood is locked during operation for safety reasons and a sensor detects
the hood position. If the hood sensor or lock is not functioning correctly,
contact QIAGEN Technical Services.
EZ2 Connect MDx User Manual 05/2022 19