Qiagen EZ2 Connect MDx User Manual page 31

The handheld bar code scanner is connected to the EZ2 using any one of the 3 available USB
ports.
The Wi-Fi adapter, if used, is connected to the EZ2 using any one of the 3 available USB ports,
those on the rear of the touchscreen might be most convenient.
Important: Use only the USB flash drive provided by QIAGEN. Do not connect other USB flash
drive devices to USB ports
Important: Do not remove the USB drive or interrupt power while downloading or transferring data
or software to or from the instrument.
Important: Always turn off the EZ2 before you plug or unplug the Wi-Fi USB device. Plug-and-play
of the Wi-Fi USB device while the instrument is turned on is not supported.
Important: USB devices other than those listed above should not be connected to any of the USB
ports on the EZ2.
EZ2 Connect MDx User Manual 05/2022 31