Qiagen EZ2 Connect MDx Safety Instructions And Quick Start Manual
Hide thumbs
Also See for EZ2 Connect MDx:
- User manual (162 pages) ,
- Quick start (4 pages) ,
- User manual (173 pages)
Related Manuals for Qiagen EZ2 Connect MDx
Summary of Contents for Qiagen EZ2 Connect MDx
- Page 1 March 2022 EZ2 Connect MDx Safety Instructions and Quick-Start Guide The EZ2 Connect MDx is intended for in vitro diagnostic use. Sample to Insight__...
-
Page 2: Table Of Contents
Symbols on the EZ2 Connect MDx Instrument ............... 18 Installation Procedures ....................20 Site requirements .................... 20 Unpacking and setting up the EZ2 Connect MDx ..........20 To set up the EZ2 Connect MDx ..............21 Connecting the EZ2 Connect MDx via Wi-Fi ..........24 Connecting the EZ2 Connect MDx via LAN cable ......... -
Page 3: Introduction
® for use with the EZ2 Connect MDx for the applications described in the kit handbooks. The EZ2 Connect MDx is intended for use by professional operators, such as technicians and physicians, trained in molecular biological techniques and the operation of the EZ2 Connect MDx system. -
Page 4: Safety Information
Safety Information Before using the EZ2 Connect MDx, it is essential that you read this guide carefully and pay attention to the safety information. The instructions and safety information in this guide must be followed to ensure safe operation of the instrument and to maintain the instrument in a safe condition. - Page 5 WARNING / CAUTION The EZ2 Connect MDx is too heavy to be lifted by one person. To avoid personal injury or damage to the instrument, do not lift the instrument alone. Use the handle attached to the box to lift the EZ2 Connect MDx.
- Page 6 Use of other reagents and substances may lead to fire or explosion. If hazardous material is spilled on or inside the EZ2 Connect MDx, the user is responsible for carrying out appropriate decontamination. Note: Do not place items on top of the EZ2 Connect MDx.
-
Page 7: Electrical Safety
Note: If operation of the instrument is interrupted in any way (e.g., due to interruption of the power supply or a mechanical error), first switch off the EZ2 Connect MDx then disconnect the electrical cord from the power supply before attempting troubleshooting. - Page 8 Any other maintenance or repair may only be carried out by authorized technical service. To ensure satisfactory and safe operation of the EZ2 Connect MDx, follow these guidelines: The line power cord must be connected to a line power outlet that has a protective ...
-
Page 9: Environment
Environment Operating Conditions Explosive atmosphere WARNING The EZ2 Connect MDx is not designed for use in an explosive atmosphere. Risk of overheating WARNING To ensure proper ventilation, maintain a minimum clearance of 10 cm at the sides and rear of the EZ2 Connect MDx. -
Page 10: Biological Safety
Damage to the instrument CAUTION Do not use the EZ2 Connect MDx in the vicinity of sources of strong electromagnetic radiation (e.g., unshielded, deliberately operated high-frequency sources or mobile radio devices), because these can interfere with the proper operation. - Page 11 Samples containing infectious agents WARNING Samples used with the EZ2 Connect MDx may contain infectious agents. Handle such samples with the greatest of care and in accordance with the required safety regulations. Always wear safety glasses, gloves, and a lab coat.
-
Page 12: Chemicals
‡ Toxic fumes Toxic fumes WARNING Do not use bleach to clean or disinfect the EZ2 Connect MDx. Bleach in contact with salts from the buffers can produce toxic fumes. EZ2 Connect MDx Safety Instructions and Quick Start Guide 03/2022... -
Page 13: Waste Disposal
Refer to your local safety regulations for proper disposal procedures. Mechanical hazards The hood of the EZ2 Connect MDx must remain closed during operation of the instrument. Only open the hood when instructed to do so by the instructions for use or when prompted by the GUI. -
Page 14: Heat Hazard
Moving parts WARNING To avoid contact with moving parts during the operation of the EZ2 Connect MDx, the instrument must be operated with the hood closed. The hood is locked during operation for safety reasons and a sensor detects the hood position. If the hood sensor or lock is not functioning correctly, contact QIAGEN Technical Services. -
Page 15: Radiation Safety
Radiation safety The EZ2 Connect MDx has a UV LED lamp. The wavelength of the UV light produced by the UV LED lamp is 270 to 285 nm. This wavelength corresponds to ultraviolet light type C, which can be used to support decontamination procedures. A mechanical lock ensures that the hood must be closed for operation of the UV LED. - Page 16 Improper use of the EZ2 Connect MDx may cause personal injuries or damage to the instrument. The EZ2 Connect MDx must only be operated by suitably qualified personnel. Servicing of the EZ2 Connect MDx must only be performed by QIAGEN Field Service Specialists. Risk of fire WARNING...
- Page 17 Risk of personal electric shock WARNING/ CAUTION Do not open any panels on the EZ2 Connect MDx. EZ2 Connect Only perform maintenance as described in the MDx User Manual EZ2 Connect MDx Safety Instructions and Quick Start Guide 03/2022...
-
Page 18: Symbols On The Ez2 Connect Mdx Instrument
Symbols on the EZ2 Connect MDx Instrument The following symbols appear on the EZ2 Connect MDx Instrument. Symbol Location Description Heating system — Heat hazard — The temperature of the inside instrument heating system can reach up to 95ºC (203°F). - Page 19 In vitro diagnostic medical device back of the instrument Type plate on the Consult instructions for use back of the instrument Type plate at the See warnings and precautions back of the instrument EZ2 Connect MDx Safety Instructions and Quick Start Guide 03/2022...
-
Page 20: Installation Procedures
Site requirements The EZ2 Connect MDx must be located out of direct sunlight, away from heat sources, and EZ2 Connect MDx User away from sources of vibration and electrical interference. Refer to the... -
Page 21: To Set Up The Ez2 Connect Mdx
To set up the EZ2 Connect MDx 1. Before unpacking the EZ2 Connect MDx, move the package to the site of installation and check that the arrows on the package point upward. In addition, check whether the package is damaged. In case of damage, contact QIAGEN Technical Services. - Page 22 If something is damaged, contact QIAGEN Technical Services. Make sure that the EZ2 Connect MDx has equilibrated to ambient temperature before operating it. 16. Retain the package in case you need to transport the EZ2 Connect MDx in the future. Refer to EZ2 Connect MDx User Manual the Packing the EZ2 section of the for more details.
- Page 23 22. From the Configuration menu under the System configuration tab, you can modify the Device Name, Date, and Time fields. 23. You may adjust the settings of the EZ2 Connect MDx according to your preferences through the Configuration menu, System Configuration, Language and Instrument Setting tabs.
-
Page 24: Connecting The Ez2 Connect Mdx Via Wi-Fi
Connecting the EZ2 Connect MDx via Wi-Fi The EZ2 Connect MDx can be connected to a Wi-Fi network using the Wi-Fi adapter (supplied with the Connectivity package in certain regions) inserted into one of the USB ports. The adapter supports the 802.11b, 802.11g, and 802.11n Wi-Fi standards, and WEP, WPA- PSK, and WPA2-PSK encryption. -
Page 25: Revision History
Revision History Revision Description 03/2022 First version of the EZ2 Connect MDx Safety Instructions and Quick-Start Guide. For further support with technical difficulties, please contact QIAGEN Technical Services at www.qiagen.com. For up-to-date licensing information and product-specific disclaimers, see the respective QIAGEN user manual. - Page 26 Notes EZ2 Connect MDx Safety Instructions and Quick Start Guide 03/2022...
- Page 27 ® , EZ2 ® (QIAGEN Group). Registered names, trademarks, etc. used in this document, even when not specifically marked as such, are not to be considered unprotected by law. HB-2924-001 03/2022 1125024 © 2022 QIAGEN, all rights reserved. EZ2 Connect MDx Safety Instructions and Quick Start Guide 03/2022...
- Page 28 Ordering www.qiagen.com/shop | Technical Support support.qiagen.com | Website www.qiagen.com EZ2 Connect MDx Safety Instructions and Quick Start Guide 03/2022...