Target Data - Mitsubishi Electric MELSEC iQ-R Series User Manual

Target data

The following shows data used for the recording function.
List of devices and labels that can be sampled for each sampling method
Devices and labels that can be sampled differ depending on the sampling method.
For details on each sampling method, refer to the following:
Page 44 Sampling methods of devices and labels
: Can be sampled, : Cannot be sampled
Sampling method
Each scan
Time specification
Trigger instruction
Safety cycle time
*1 Can be sampled when using a safety CPU.
Devices and labels that can be sampled
The following table shows the devices and labels that can be sampled by using the recording function.
For the method for specifying a device and label to be sampled, refer to the following:
Page 35 Specifying a device and label to be sampled
Standard device Standard label
 
 
 
 
*1
Safety device Safety label
 
 
 
 
*1
Standard/safety
*1
shared label




1 FUNCTIONS
31
1.1 Recording Function
1