Mitsubishi Electric MELSEC iQ-R Series User Manual page 176

Error code Error name
3140H to 3142H Module Error
3150H Module Error
31C0H to 31C4H Module Error
31C5H Module Parameter Error
31C6H to 31CAH Module Error
3300H to 3303H Module Error
3305H Module Configuration Error
3306H Recording Setting Error
3405H Recording Setting Error
3C00H to 3C03H Hardware Error
3C0FH Hardware Error
3C22H Memory Error
5 TROUBLESHOOTING
174
5.6 Recorder Module
Error description



• A module parameter of the recording
operation setting which is not supported
by the firmware version of the target
recorder module was written.
• The contents in the module parameter are
broken.


The number of modules set in "Sub" in the
camera recorder module has exceeded the
available number.
• The start I/O No. and mounting position of
the camera recorder module are different
from the ones of the system parameter at
the recording setting.
• The recording operation setting of the
camera recorder module is different from
the one at the recording setting.
A recording setting file which is not
supported by the firmware version of the
target recorder module was written.
A hardware error was detected.
A hardware error was detected.
A memory error was detected.
Corrective action
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please check the version of the recorder module, use
a compatible product, and then write the module
parameter again.
• Please write the module parameter again with the
engineering tool. If the same error is displayed again,
please consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
Please set "Sub" in the camera recorder module less
than the available number.
• Please check the system parameter and actual
system configuration, and review the video data
receiving target settings in the recording setting.
• Please check the recording operation setting with the
module parameter of the camera recorder module
and review the video data receiving target settings in
the recording setting.
Please check the version of the recorder module, use a
compatible product, and then write the recording file
again.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.