Mitsubishi Electric MELSEC iQ-R Series User Manual page 177

Error code Error name
3C2FH Memory Error
3C32H Memory Error
3EA0H Module Error
*1 An event is registered as a continuation error when "Error is registered (continuous error)" is selected for "Warning due to program
change during recording operation" under "Operation Setting at Event Detection" in the application setting in the module parameter.
Error description
A memory error was detected.
A memory error was detected.

Corrective action
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• If this error occurs during the automated hardware
test, perform a firmware update and perform the
automated hardware test again. If the same error is
displayed again, the recorder module may have a
hardware error. Contact the nearest Mitsubishi
Electric System Service Co., Ltd. or Mitsubishi
Electric Corporation branch office or agent.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
5 TROUBLESHOOTING
5.6 Recorder Module
5
175