Mitsubishi Electric MELSEC iQ-R Series User Manual page 280

■Recording files saving completion code (Un\G1510)
Each value is stored at each timing as follows:
Value
0 (no error)
Values other than 0 (error
code)
■Camera event receiving status (Un\G1593 to 1600)
The camera event receiving status is stored.
Value Description
0 (not set) There is no camera event notification setting.
If the camera event notification setting is not enabled in the module extended parameter or the camera event type is not supported, 'not
set' is stored.
1 (not receiving) A camera recorder module is not waiting to receive camera events from a network camera.
2 (waiting for A camera recorder module is waiting to receive camera events from a network camera.
receiving) Camera events detected by a network camera can be received.
■Camera recording status (Un\G1650 to 1657)
The operating status for video data is stored.
Value Description
0 (stopped) The recording function is stopped.
The status switches to 'stopped' in the following cases:
• After starting a camera recorder module
• After resetting a CPU module
• No recording settings written
1 (preparing) An operation is being prepared (such as analyzing recording settings or establishing the communication with a target network camera).
2 (no setting) The recording operation status is 'operating' and the communication with a target network camera is established, but the network
camera is not set in the receiving target setting.
3 (operating) The recording function is running for a target network camera.
The status remains 'operating' even if the communication with the network camera is disconnected.
4 (file saving trigger A file saving trigger is satisfied and video data for a remaining saving period is being received and accumulated.
satisfied)
5 (saving) A video file is being saved.
7 CAMERA RECORDER MODULE (DETAILED SPECIFICATIONS)
278
7.4 Buffer Memory
Main module
• A file saving trigger is satisfied.
• The operating status of the main module switches to
'operating' after starting the recording function. (It is initialized
to '0' (no error).)
• Saving a recording file fails in the main module.
• Saving a recording file fails in a sub module with recording
target data.
• There is video data that failed to be saved in the main module
and all sub modules with recording target data.
Sub module
• A file saving trigger is satisfied.
• The operating status of the camera recorder module itself
switches to 'operating' after starting the recording function. (It
is initialized to '0' (no error).)
• Saving a recording file fails in the camera recorder module
itself.
• There is video data that failed to be saved in the camera
recorder module itself.