Mitsubishi Electric MELSEC iQ-R Series User Manual page 99

■IP address setting screen
The IP address, subnet mask, and default gateway of a recorder module/camera recorder module can be set.
Item
IP Address
Subnet Mask
Default Gateway
■DNS setting screen
The IP addresses of preferred and alternate DNS servers can be set.
Item
DNS Server 1 Address
DNS Server 2 Address
Description
Set the IP address of the own node.
Ensure that the own node and the external device to be communicated with have the
same class and subnet address.
Set the IP address in the range of class A/B/C.
If IP address is not set, the module operates 192.168.3.3.
Please note the following points to set the IP Address and the Subnet Mask setting.
• Any of the bits of IP address's host address (that part of subnet mask that carries
0) is not set to 0 or 1.
• Any of the bits of IP address's network address (that part of subnet mask that
carries 1) is not set to 0 or 1.
Set the subnet mask of the own node.
Set to determine how many bits of the IP address are used as the network address,
which is used to identify the network.
For example, set '255.255.255.0' to assign the upper 24 bits of IP address to the
subnet mask.
Please note the following points to set the IP Address and the Subnet Mask setting.
• Any of the bits of IP address's host address (that part of subnet mask that carries
0) is not set to 0 or 1.
• Any of the bits of IP address's network address (that part of subnet mask that
carries 1) is not set to 0 or 1.
Set the IP address of the default gateway (the device which the own node passes
through to access a device of another network).
Please set subnet address of default gateway so that it is the same with the one of
host station.
Description
Specify the IP address of a preferred DNS server.
Specify the IP address of an alternate DNS server.
2.2 Module Parameters (Recorder Module/Camera Recorder Module)
Setting range
• Empty (no setting)
• 1.0.0.1 to 223.255.255.254
(The IP address must start with
a value from 1 to 223, excluding
127.)
(Default: Empty)
• Empty
• 128.0.0.0 to 255.255.255.252
(Default: Empty)
• Empty
• 1.0.0.1 to 223.255.255.254
(The IP address must start with
a value from 1 to 223, excluding
127.)
(Default: Empty)
Setting range
• Empty
• 1.0.0.1 to 223.255.255.254
(The IP address must start with
a value from 1 to 223, excluding
127.)
(Default: Empty)
• Empty
• 1.0.0.1 to 223.255.255.254
(The IP address must start with
a value from 1 to 223, excluding
127.)
(Default: Empty)
2 PARAMETER SETTING
2
97