Mitsubishi Electric MELSEC iQ-R Series User Manual page 64

■Recording buffer batch saving mode
The recording buffer batch saving mode is a mode for saving all data accumulated in the recording buffer when selecting "File
Saving Trigger Only" for the recording method.
When this mode is enabled and a file saving trigger is satisfied, all data accumulated in the recording buffer is saved.
This allows data in a period before a set saving period before trigger to be saved.
(2)
(a)
(c)
(d)
(1) File saving trigger
(2) Accumulating data
(3) Time
(a) Saving period before trigger
(b) Saving period after trigger
(c) Period during which data is accumulated in the recording buffer
(d) Period during which data is actually saved
The recording buffer batch saving mode can be enabled or disabled in the following buffer memory
camera recorder module or in the "Recording Status Detailed Information" screen of GX Works3. (Page 228 Recording
operation specification area (Un\G4000 to 4799), Page 145 Recording Status Detailed Information Screen)
• Setting No.1: 'Recording buffer batch saving mode' (Un\G4001)
• Setting No.2: 'Recording buffer batch saving mode' (Un\G4101)
• Setting No.3: 'Recording buffer batch saving mode' (Un\G4201)
• Setting No.4: 'Recording buffer batch saving mode' (Un\G4301)
*1 Buffer memory of a module set as the main one when configuring multiple modules
When the mode is enabled for a module set as the main one, this also applies to a module set as a sub one.
Page 67 Operation of the recording function when configuring multiple modules
1 FUNCTIONS
62
1.1 Recording Function
(1)
(b)
(3)
*1
of a recorder module/