Mitsubishi Electric MELSEC iQ-R Series User Manual page 289

PTZ control area (Un\G38000 to 43599)
Information on PTZ control can be checked.
Buffer memory name
Network camera 1 PTZ PTZ control authority mode
information
PTZ operation processing requestor
PTZ operation status
Preset
Preset
position 1
Preset position 2 to 16
Network camera 2 PTZ information
Network camera 3 PTZ information
Network camera 4 PTZ information
Address
Un\G38000
Un\G38001
Un\G38002
Specified preset position Un\G38006
No.
Specified preset position Un\G38007
*1
movement speed
Preset position execution Un\G38008
request
Preset position name Un\G38010 to 38041
*2
Position information (P) Un\G38042
*2
Position information (T) Un\G38043
*3
Position information (Z) Un\G38044
Un\G38050 to 38649
Un\G38700 to 39399
Un\G39400 to 40099
Un\G40100 to 40799
7 CAMERA RECORDER MODULE (DETAILED SPECIFICATIONS)
Description
The operation mode of PTZ control authority mode is stored.
0: PTZ enable mode
1: PTZ preset mode
2: PTZ disable mode
The request source for PTZ operation processing to a camera
recorder module is stored. (Page 288 PTZ operation
processing requestor (Un\G38001))
0H: Not requested
1H: Tool
2H: GOT
3H: Ladder program
The current PTZ operation status is stored. (Page 288
PTZ operation status (Un\G38002))
0H: Not requested
1H: PTZ control being performed
2H: PTZ control completed successfully
3H: Preset position being registered
4H: Preset position registered successfully
5H: Preset position being deleted
6H: Preset position deleted successfully
7H: Preset request being executed
8H: Preset request completed successfully
FFFFH: Error completion
Specify the preset position number of a move destination
(setting range: 1 to 16).
Specify a movement speed to adjust the range captured by a
specified network camera (setting range: 0 to 1000).
Request to move the range to a specified preset position.
(Page 289 Preset position execution request
(Un\G38008))
0: Not requested
1: Requested
The name of a preset position set for preset position 1 is
stored.
A value of the pan (P) (horizontal direction), which is position
information of preset position 1, is stored.
(Value to be stored: -1000 to 1000)
A value of the tilt (T) (vertical direction), which is position
information of preset position 1, is stored.
(Value to be stored: -1000 to 1000)
A value of the zoom (Z) (zoom in/out), which is position
information of preset position 1, is stored.
(Value to be stored: 0 to 1000)
Details are the same as preset position 1.
Details are the same as network camera 1 PTZ information.
7.4 Buffer Memory
7
287