Mitsubishi Electric MELSEC iQ-R Series User Manual page 83

Target
The following table shows project data to be saved.
Data name
Parameter
Sequence program
Device comment
Global label setting
Recording setting
Save destination
Project data is saved to either of the following save destinations according to a save destination for a recording file.
Save destination
*1
SD memory card
File server
*1 One inserted in the main module when configuring multiple modules
Up to 10 units of project data can be saved.
If it is exceeded, old project data is deleted and new project data is saved.
• Multiple units of project data can be saved; therefore, past project data used to play a past recording file can
be acquired from the save destination for the recording file and used.
• Project data in a CPU module is compared with the latest project data if there are multiple units of project
data saved in a save destination, and it is saved only when there is an update.
• If there is no project data saved, it is saved without checking for any update.
■Configuring multiple recording settings
When specifying a different save destination for a recording file in multiple recording settings, project data is saved to each
save destination and can be used to play each recording file.
When specifying a same save destination for a recording file in multiple recording settings, project data is saved to the same
save destination. The saved project data can be used in common to play a recording file saved in each setting.
CPU parameter
System parameter
Module parameter
Module extended parameter
Program file
FB file
Device comment
Save destination folder
RECORD\PRJ\(save date and time folder)
(Save destination folder specified in the file server setting in the recording setting)\RECORD\PRJ\(save date and time
folder)
1 FUNCTIONS
81
1.1 Recording Function
1