Mitsubishi Electric MELSEC iQ-R Series User Manual page 66

Operating status for video data
The following table shows the operating status for video data for each network camera.
The operating status can be checked in 'Camera recording status' of a camera recorder module (Un\G1650 to 1653,
Un\G1850 to 1853, Un\G2050 to 2053, Un\G2250 to 2253). (Page 271 Recording status area (Un\G1500 to 3199))
Status
Stopped
Preparing
No setting
Operating
File saving trigger satisfied
Saving
■Status after starting the recording function
After starting the recording function, the camera recording status switches to 'preparing' for a target recording setting.
It switches to 'operating' when the preparation is completed in a camera recorder module, the communication with a network
camera set as a receiving target is established, and video data is delivered.
For a network camera not set as a receiving target, it switches to 'no setting' even after the preparation is completed in the
camera recorder module.
For the operation to start the recording function, refer to the following:
Page 65 Start
■Status after stopping the recording function
After stopping the recording function, the camera recording status switches to 'stopped' for all network cameras for a
recording setting.
However, it switches to 'stopped' after saving in a camera recorder module is completed when the status is 'file saving trigger
satisfied' or 'saving.'
For the operation to stop the recording function, refer to the following:
Page 66 Stop
1 FUNCTIONS
64
1.1 Recording Function
Description
The recording function is stopped.
The status is 'stopped' in the following cases:
• After starting a camera recorder module
• After resetting a CPU module
• No recording settings written
Operations such as analysis of module extended parameters and communication establishment and setting for a
target network camera are being prepared.
The recording function is running and the communication with a target network camera is established, but no network
camera is set in the video data receiving target setting.
The recording function is running for a target network camera.
The status remains 'operating' even if the communication with the network camera is disconnected.
A file saving trigger is satisfied and video data for a remaining saving period is being received and accumulated.
A recording file is being saved.
If the status switches to 'saving' for multiple recording settings, the settings are saved in order from one that switches
first.