Preset Position Setting (Camera Recorder Module) - Mitsubishi Electric MELSEC iQ-R Series User Manual

2.4

Preset Position Setting (Camera Recorder Module)

This section shows the procedure and screen for registering and deleting a preset position for a network camera connected to
a camera recorder module, and moving the range of data captured by a network camera to a registered preset position.
Window
1.
Select [Tool]  [Module Tool List] in GX Works3.
2.
Select [Preset Position Settings] in the "Module Tool List" screen, and click the [OK] button.
3.
Select a camera recorder module (RD81RC96-CA) in the "Module Selection" screen, and click the [OK] button.
Displayed items
Item
Camera Information Target Camera
[Camera Access] button
Manufacturer Name
Model Name
Camera Comment
IP Address
Preset Position No.
*3
Information
Registration Status
Preset Position Name
*4
Move
*6
[Register] button
*6
[Delete] button
*1 Only enabled network cameras can be selected.
Whether it is enabled can be checked in 'Network camera setting enabled/disabled' (Un\G34000, Un\G34500, Un\G35000, Un\G35500)
Description
Select a target network camera number.
Click this to start a web browser (default browser for the operating system) to access a network
*2
camera.
The URL of a connection destination is as follows:
• http://(IP address):(TCP port number)/
The manufacturer name of a network camera with the number selected for "Target Camera" is
displayed.
The model name of a network camera with the number selected for "Target Camera" is displayed.
The camera comment set for a network camera with the number selected for "Target Camera" is
displayed.
The IP address of a network camera with the number selected for "Target Camera" is displayed.
The preset position numbers are displayed.
The registration status of a preset position is displayed.
The name of a preset position is displayed.
Click the [Execute] button to move the range of data captured by a target network camera to a
*5
registered preset position.
While the range is being moved, "Moving" is displayed. (In this case, the [Register] and [Delete]
buttons cannot be clicked.)
Click this to display the "Preset Position Registration" screen.
Page 113 Preset position registration
Click this to display the "Preset Position Delete" screen.
Page 114 Preset position deletion
2.4 Preset Position Setting (Camera Recorder Module)
*1
2 PARAMETER SETTING
2
111