Chapter 7 Camera Recorder Module (Detailed Specifications); Function Details; Recording Function; Network Camera Communication Function - Mitsubishi Electric MELSEC iQ-R Series User Manual

7
CAMERA RECORDER MODULE (DETAILED
SPECIFICATIONS)
This chapter explains the function details, module labels, input/output signals, and buffer memory of a camera recorder
module.
7.1

Function Details

This section shows the details on the functions of a camera recorder module.

Recording function

This function can be used to accumulate data (devices and labels) sampled in a CPU module and video data delivered from a
network camera, and save them and an event history of the CPU module as a recording file when a file saving trigger is
satisfied.
For details, refer to the following:
Page 16 Recording Function

Network camera communication function

This function can be used to communicate with a network camera via a network.
By communicating with a network camera, the following functions can be used.
Function
Search
Account authentication
Specific information
*1
monitoring
Video data delivery setting
Video data reception and
*1
accumulation
Time synchronization
*1
control
*1
PTZ control
*1
Alive check
Camera event reception
*1 Can be used after account authentication is successful.
A minor error that occurs in the communication with a network camera can be changed to a warning.
If changed, it is not displayed as an error for the ERROR LED, in the module diagnostics, and buffer memory
of a camera recorder module.
For details on the setting, refer to the following:
Page 100 Operation setting at event detection
7 CAMERA RECORDER MODULE (DETAILED SPECIFICATIONS)
234
7.1 Function Details
Description
To search for up to 32 ONVIF supported network cameras in the same network as a camera
recorder module.
To authenticate an account to connect a camera recorder module to an ONVIF supported
network camera.
To acquire specific information of a network camera.
*1
To set parameters of a network camera connected to a camera recorder module.
To receive and accumulate video data delivered from a network camera.
To synchronize the time between a camera recorder module and a network camera.
To perform PTZ control on a network camera if it is supported by the network camera.
To periodically monitor whether the communication is established with a network camera.
To configure the camera event notification setting for a network camera.
With this setting, camera events can be received from a network camera.
Reference
Page 235 Search
Page 235 Account
authentication
Page 236 Specific information
monitoring
Page 237 Video data delivery
setting
Page 238 Video data reception
and accumulation
Page 238 Time synchronization
control
Page 238 PTZ control
Page 238 Alive check
Page 239 Camera event
reception