Mitsubishi Electric MELSEC iQ-R Series User Manual page 250

PTZ control authority mode function
This function can be used to set the authority to perform the PTZ control function and preset position function for each
network camera.
The following table shows the availability for each mode of the PTZ control authority mode.
: Available, : Not available
PTZ control
authority mode
PTZ enable mode
PTZ preset mode
PTZ disable mode
The authority can be set in the "Camera Individual Settings" screen in the module extended parameter. (Page 105
Camera individual setting)
If "PTZ Disable Mode" is selected for the PTZ control authority mode, a PTZ authority mode unexecutable error (error code:
1CB0H) occurs when moving to a preset position is performed by using the buffer memory.
The PTZ control authority mode of a network camera can be checked in 'PTZ control authority mode' (Un\G38000,
Un\G38700, Un\G39400, Un\G40100) of a camera recorder module. (Page 287 PTZ control area (Un\G38000 to 43599))
7 CAMERA RECORDER MODULE (DETAILED SPECIFICATIONS)
248
7.1 Function Details
Description Operation availability for each mode
PTZ control
function

The PTZ control
function and preset
position function can be
performed.
Only the movement of 
the preset position
function can be
performed.

Neither the PTZ control
function nor the preset
position function can be
performed.
Preset position function
Registration Deletion
 
 
 
Movement


