Device/Label Sampling Target List" Screen - Mitsubishi Electric MELSEC iQ-R Series User Manual

"Device/Label Sampling Target List" screen

Devices and labels specified as sampling targets by using each specification method are listed.
Window
Click the [Device/Label Sampling Target List] button under "Device/Label Sampling Target Setting."
Displayed items
Item
Sampling Target Device List
Sampling Target Label Size List
Sampling Size (Overall)
*1 Displayed in red and a warning icon appears in any of the following cases:
An unconverted program is included in a target program when using 'device/label batch specification.'
The checkbox of "Include the Parameter" is selected and a project is unconverted when using 'device/label batch specification.'
A target program exists in the program setting in the CPU parameter but not in the navigation window when using 'device/label batch
specification.'
A local device and local label used in a program other than a target one are specified as sampling targets when using 'specify from the
device/label list.'
A global label (no device assigned) is specified as a sampling target but an unconverted program is included in a target program when
using 'specify from the device/label list.'
A module label (no device assigned) is specified as a sampling target but a project is unconverted when using 'specify from the device/
label list.'
A local device in an unconverted or a non-existent program is specified as a sampling target when using 'specify the device range.'
3 RECORDING SETTING
134
3.3 Device/Label Sampling Setting

Device/Local Device
Start Device
End Device
Points (Decimal)
Size [Word]

Label Type
Size [Word]
Description
Sampling target devices are listed.
• If a sampling target is specified for multiple specification methods, it is
displayed without duplication.
(Example) When specifying D0 to D31 for 'device/label batch specification'
and 'specify the device range,' they are displayed for one of the methods
only.
• A device is not displayed if "-" is displayed in the "Sampling Target" column
when using 'specify the device range.'
• If the ranges of devices to be sampled are continuous or overlap, they are
displayed as one range.
(Example) When specifying D0 to D31 for 'device/label batch specification'
and D32 to D95 for 'specify the device range,' D0 to D95 are displayed.
• When using 'include SFC device' of 'device/label batch specification,'
"Devices for the System" is displayed in the bottom row.
The type of a device is displayed.
For a local device, a program to which the device belongs is also displayed.
The start of devices to be sampled is displayed.
The end of devices to be sampled is displayed.
The number of device points to be sampled is displayed.
The size of a device to be sampled is displayed.
The total size of labels to be sampled is displayed for each type.
The type is displayed.
The total size is displayed.
The total size of devices and labels to be sampled is displayed.
*1