Setting The Switches Of The Intelligent-Function Module - Mitsubishi Electric MELSEC-Q Series User Manual

7 FUNCTION

7.8 Setting the Switches of the Intelligent-Function Module

7 - 24
(1) Setting the Switches of the Intelligent-Function Module
The switches of the intelligent-function module is to set the switches of an QCPU-
compatible intelligent function module using GX Developer.
The settings of the switches set by GX Developer is written from Basic model
QCPU to each intelligent function module at the leading-edge or reset of Basic
model QCPU.
GX Developer
Parameter
Switch setting of the
intelligent function module
at the I/O assignment
(2) Setting the Switches of the Intelligent-Function Module
In the "I/O assignment" sheet of the PLC Parameter dialog box, specify the
desired switch setting. Select "Intelli." in the "type" column of a slot for which to
set the switches of the intelligent function module.
Select "Intelli".
(3) Precautions
(a) Do not apply the switch setting for an intelligent function module.
If the switch setting for an intelligent function module is specified an error
(SP.PARA.ERROR) will occur.
(b) Set "Interrupt" as the type to set the switches of the intelligent function
module using GX Developer.
Refer to the following manual for details of the interrupt module switch
setting.
• Building Block Type I/O Module User's Manual
(c) The switch setting is made valid when:
• The PLC is powered ON; or
• CPU module is reset.
Basic model
QCPU
Parameter
Write
Select "Switch Setting".
MELSEC-Q
Intelligent function
module
Power supply
On/QCPU
Switch setting
module Reset
Designate the contents of the
intelligent function module switch.
7 - 24