Table of Contents
Advertisement
4.2
CONTROLLER PANEL
NOTE: Partial indicator states
Alarm Indicator: slowly blink when warning alarms; fast blink when shutdown alarms; won't illuminate when there is no
alarm.
Status Indicator: won't illuminate when genset stand by; blink 1 time per second in start or stop process and always
illuminate when runs normally; for J1939 gensets, press start key in auto mode or stop mode, ECU power outputs and
status indicator always illuminates.
Auto Mode Indicator: only illuminate in auto mode; blink in auto mode and start delay count down.
HGM6100LT Series Genset Controller User Manual
Fig.1 – HGM6110LT Front Panel Indication
Fig.2 – HGM6120LT Front Panel Indication
Page 10 of 50
Advertisement
Table of Contents
