Controller Panel; Parameter Setting - Smartgen HEM4300 User Manual

4.2 CONTROLLER PANEL

NOTE: Indicators description.
Type
Stop Alarm Indicator
Warning Alarm Indicator
Running Status Indicator
Charging Failure Indicator
Stop Status Indicator
Load Status Indicator

4.3 PARAMETER SETTING

Press F6 in the main screen, it will enter user menu.
─ After entering correct password, it can enter related parameter setting, lock setting,
maintenance setting, default password is 01234.
─ Language: optional Simplified Chinese, English and others (default Traditional Chinese).
─ DPF: display DPF regeneration status indicator.
─ Event log: enter event log detail page.
Parameter setting includes the following contents:
─ Module setting;
─ Timer setting;
─ Parameter setting;
─ Temperature setting;
─ Oil pressure setting;
─ Aux. sensor 1;
─ Aux. sensor 2;
─ Aux. sensor 3;
─ Aux. sensor 4;
─ Aux. sensor 5;
HEM4300 Engine Controller User Manual
Fig.1 HEM4300 Front Panel Description
Table 5 Indicators Description
Yellow, slow flashes (1 times/s)
Green, always illuminates after safety running
Red, always illuminates after charging failure
Red, always illuminates in stop status
Red, always illuminates in load status
Description
Red, fast flashes (5 times/s)
Page 10 of 55