Controller Panel; Main Display - Smartgen HES7120-PV User Manual

4.2 CONTROLLER PANEL

NOTE: Illustration for part indicators.
Alarm Type
Warning alarm
Trip alarm
Shutdown alarm
Trip and stop alarm
Indicator
NOTES:
a) Status Indicators: illuminate always after startup and before shutdown; extinguished during other periods.
b) PV Indicator: illuminates always PV generator is normal; flashes when PV generator is abnormal; extinguished
when PV generator is standby.

4.3 MAIN DISPLAY

The main display is divided into main interface, data interface, status interface and alarm interface,
is
used to return to the main interface and
a) Two display modes can be set in the main interface:
A large font display includes the following contents: busbar voltage, busbar power, PV

voltage, PV power, the bottom line shows one of the states.
A multi-line display includes the following: busbar voltage, busbar frequency, busbar

power, PV voltage, PV frequency, PV power, total load active power, total load reactive
power, power supply voltage, controller time. The bottom line shows one of the states.
b) Data interface includes the following contents:
Busbar two screens: phase voltage, line voltage, frequency, phase sequence, voltage

imbalance percentage, current, active power, reactive power, apparent power, power
HES7120-PV Hybrid Engergy Controller
HES7120-PV HYBRID ENERGY CONTROLLER USER MANUAL
Fig.1 HES7120-PV Front Panel
Table 5 Alarm Indicator Description
slowly flashing (once per second)
slowly flashing (once per second)
fast flashing (5 times per second)
fast flashing (5 times per second)
off
2020-05-20
Alarm Indicators
is used to turn the screen.
Version Page 11 of 59