Table of Contents
Advertisement
No.
Items
User
Configured
28
Shutdown
NOTE: ECU warning and shutdown alarm explains that check engine according to displayed alarm contents;
otherwise check engine user manual according to SPN alarm code for gaining information.
HGM6100LT Series Genset Controller User Manual
inactive）, the controller will initiate a shutdown alarm signal, and the
LCD will display the "User Configured 4 Shutdown".
When controller detects that the input port 5 selects 33 "User
Configured", close/open is active and the action selects "Shutdown
Alarm", when the controller meets the selection of active range （not
5
inactive）, the controller will initiate a shutdown alarm signal, and the
LCD will display the "User Configured 1 Shutdown".
Description
Page 17 of 50
Advertisement
Table of Contents
