Zeroing (Reset) Of The Indicator Of Service Inspection Intervals; Error Signalling - Zetor Forterra CL 100 Operator's Manual

INSTRUMENT PANEL

Zeroing (reset) of the indicator of service inspection intervals

F15N027
Enter the service menu by longer pressing of the button ( A ).
Use the buttons ( B ) and ( C ) to select the item calibration indicated with the arrow ( a ). By pressing the
button ( A ) you enter the calibration menu.
Use the buttons ( B ) and ( C ) to select the item service indicated with the arrow ( b ). By pressing the button
( A ) you enter the service menu.
Use the buttons ( B ) and ( C ) to select the item [clearing] indicated with the arrow ( c ). By pressing the
button ( A ) reset the indicator of the service interval.
To return to the service menu, use the buttons ( B ) and ( C ) to select the item EXIT and press the button
( A ) (Enter).
When the maintenance was performed, zero (reset) the indicator of service inspection
intervals.

Error signalling

Errors arising during tractor operation are indicated by
switching the corresponding signal lamp, acoustic signal
and error message in the instrument panel display.
If the error is indicated, the signal lamp still glows, even
though the display is switched to the next display.
If the error is not eliminated or the indicated state has not
returned to a normal state:
the corresponding signal lamp glows
when the tractor is switched off, the key in the switch box
is moved to position I and then the engine is started, the
corresponding signal lamp is switched on again and the
error message runs through the display.
C15N111
1 - The signal lamp of a serious defect of the system (red).
2 - The signal lamp of a less serious defect of the system
(orange).
3 - Operational protection signal lamp (blue).
4 - Gearbox malfunction signal lamp (red). It glows
together with any of the signal lamps indicating errors, as
long as the error is related to the gearbox.
54