Inhibition Of Regeneration Of The Diesel Particulate Filter - Dpf Inhibit - Zetor Forterra CL 100 Operator's Manual

SYSTEM OF ADDITIONAL TREATMENT OF EXHAUST GASES

Inhibition of regeneration of the diesel particulate filter - DPF Inhibit

The function of inhibition of regeneration of the diesel particulate filter (DPF Inhibit) is used to block the
process of DPF regeneration for safety reasons only during operation of the tractor in a flammable
environment (e.g. storage of hay or straw).
DPF INHIBIT is set in the menu for setting the engine (b). After entering the tab, choose the corresponding
item using the buttons (B) and (C). Activate the mode of inhibition of the filter regeneration (b) by long
pressing the button (A). Successful activation is indicated by the activated symbol (c) in the upper right
corner of the instrument panel display. In case that the regeneration must be started, a maintenance symbol
is activated simultaneously with the symbol of regeneration inhibition.
Long-term inhibition of regeneration (in the order of several hours) causes that the DPF filter
becomes full and subsequently the engine power is decreased!
The function of inhibition of DPF regeneration should be active for safety reasons only. After
the period when the regeneration must be inhibited has expired, immediately set the mode of DPH
automatic regeneration!
S15N022
74