Internal Lighting; Aggregation Opening; Driver´s Seat - Zetor Forterra CL 100 Operator's Manual

Internal lighting

To be turned on and off by means of a button marked with
the arrow.

Aggregation opening

Aggregation opening serves for cabelling or Bowden
control of aggregated tools placement.
Pull to protrude the part of sealing of rear window in
upward direction. Put the aggregated tool control through
the originated hole.
Insert cabelling or Bowden controls to the holes of
passage of aggregation opening. Return the sealing of the
rear window to its original position by exercising pressure.
Driver´s seat
1 - The control of setting the seat suspension according to the driver´s weight (setting by rotation, in the
direction according to pictogram on the boot of the seat)
2 - Longitudinal setting of the seat lever
3 - Seat vibrations absorption control (by tilt over of the control forward, floating position of the seat is
engaged)
4 - Setting the angle of rest control
5 - Tilting elbow rest
6 - Pneumatic suspension of seat setting control (by pulling in the direction upward, the rigidity of the
suspension increases, by pulling in downward direction, it decreases)
Driver´s seat with mechanical suspension
Control according to points 1, 2, 3, 4 and 5
Point 2, lever is placed on the right
Driver´s seat with pneumatic suspension
Control according to points 2, 3, 4, 5 and 6
Point 2, lever is placed on the left
ACQUAINTANCE WITH TRACTOR
30
F13BN014
F11N091
FH12N026