Brake Fluid Replacement; Carbon Filter Installation Instructions; Cleaning The Heating Filters - Zetor Forterra CL 100 Operator's Manual

Brake fluid replacement

The vessel is placed on the rights side and is accessible
after lifting the front bonnet. Keep the level of brake fluid in
the range of 3/4 of the content of the vessel (maximum
height) to 1/2 of the vessel content (minimum height of the
level).
When handling brake liquid, keep absolute
cleanness. Check the brake liquid level daily before
starting your work.

Carbon filter installation instructions

1. Remove the old filter from the air duct orifice in the
place of its mounting.
2. Remove the protective package from the new filter.
3. Insert the filter into the air duct orifice in such a way to
make the air flow direction correspond to the flow direction
through the filter in accordance with the arrow on the filter.
The entering air must first pass through the white dust
filtration layer.
4. Check proper sealing of the filter.
5. Secure the filter.

Cleaning the heating filters

Recover the filters positioned under the covering grills
over the windshield outside the cabin with regard to the
degree of clogging:
- by shaking
- by blowing with compressed air
Check the filters for clogging daily. Replace heavily
clogged filters.
The safety cab of the tractor is not equipped
with special filters of air aspirated to the cab. It does
not protect the operator from the effect of aerosols
and other harmful substances! Use a filter with active
carbon when working with harmful substances.
MAINTENANCE INSTRUCTIONS
171
FH12N017
F13BN029
F13BN030