Gear Shifting - Zetor Forterra CL 100 Operator's Manual

Diesel particle filter regeneration
When the tractor is operated, the filter of solid particles is fouled with solid particles during the fuel
combustion while the engine is running.
The full filter of solid particles is automatically regenerated (cleaned) while the engine is running by increased
temperature exhaust gases which is achieved by injection of the fuel to the system of the filter of solid
particles DPF during the regeneration.
The regeneration of the filter of solid particles DPF being performed is indicated by the green signal lamp on
the instrument panel.
ATTENTION: During regeneration of the filter of solid particles DPF the temperature of exhaust
gases and of the surface of the filter of solid particles is increased substantially.
There is an increased risk of fire or explosion during operation of the tractor in an environment with
risk of fire or in an explosive environment.
During operation of the tractor in an environment with risk of fire or in an explosive environment when
regenerating the filter of solid particles DPF it is necessary to leave this environment with the tractor
immediately or interrupt the regeneration of the filter of solid particles DPF in the menu of the instrument
panel.
More information in chapters Instrument Panel and System of Additional Treatment of Exhaust Gases.
When shifting individual gear speed (1-4) or reversing (F-R) observe the instructions for
putting the tractor in motion and gear shifting in this manual. When the tractor has been started and
is still standing, depress the clutch pedal and wait for approx. 2 seconds. Only then shift the required
gear speed or select the reverse direction.
To increase safety and to avoid unexpected situations use the foot brake during the shifting as well.
During operation of the tractors with the engine equipped with the filter of solid particles avoid
long-term operation at idling or at low engine load.
DRIVING OPERATION DRIVING OPERATION
P15N058
81