Shifting Road And Reduced Speeds; Signalization Of Multiplier Function; Multiplier Pre-Selection Signalization - Zetor Forterra CL 100 Operator's Manual

Shifting road and reduced speeds

H - road speeds
N - neutral
L - reduced speeds
Shifting of gears of the main gearbox with reduced speeds
is the same as with road speeds.
Considering low speed of the tractor, change nearly
always means moving off from rest.
Shifting using the lever of road and reduced
speeds is only possible when the tractor is in
standstill.
Three-gear torque multiplier
Three-gear multiplier is a standard equipment of all types
of tractors. Shifting individual gears of three-gear multiplier
is controlled by two buttons on the head of main gear
shifting lever.
Increasing travel speed
H-
Decreasing travel speed
L-
It is done without travel clutch pedal depressed (under
load).

Signalization of multiplier function

Individual engaged gears of multiplier are signalized by
a sign (1) in the left upper corner of the display.
The highest gear (the fastest)
3
Middle gear
2
Lowest gear (the slowest)
1
Increasing, decreasing the travel speed by two gears
Increases the travel speed by
2xH
two gears
Decreases the travel speed by
2xL
two gears
DRIVING OPERATION DRIVING OPERATION
83
F72
FH12N058
PP15N027
FH12N054