Gear Shifting From Lower To Higher Gears; Gear Shifting From Higher To Lower Gears; Reversing Lever; Three-Gear Torque Multiplier - Zetor Forterra CL 100 Operator's Manual

Gear shifting
The tractors are equipped with the four stage
synchronized gearbox, three stage multiplier of the torque,
reversal system and two stage reduction. The four stage
synchronized gearbox is shifted with the main control lever
with buttons for the control of individual gears of the
multiplier.
The gearbox does not allow the fourth gear
shift for reverse driving!

Gear shifting from lower to higher gears

Depress the clutch pedal (clutch disengaged). At the same
time release the pedal of foot fuel control and shift the
applicable higher gear. Release the clutch pedal (clutch is
engaged) smoothly and at same time increase engine
revolutions.
Note: For increasing the life cycle of synchrones, it is
possible to shift from higher to lower gear with the
socalled double declutching.

Gear shifting from higher to lower gears

Depress the clutch pedal and shift the gear shifting lever
through neutral to lower gear.
Note: For increasing the life cycle of synchrones, it is
possible to shift from higher to lower gear with the
socalled double declutching.

Reversing lever

The reversing lever is used to select the driving direction
of the tractor (forward, reverse).
Forward drive
F -
N - Neutral
Reverse drive
R -
The reversing gearbox offers 18 reverse speeds that are
approximately as fast as the forward speeds. Therefore,
consider well and select a suitable reverse speed for the
particular character of work.
DRIVING OPERATION DRIVING OPERATION
82
FH12N058
F_02_44a
F_02_45a
E149B