Table of Contents
Advertisement
Automatic mouth of the CBM stage hitch
When the lever (1) is moved in the direction of the arrow
(a), the pin (2) is retracted to the upper position, which is
signalled by the extended indicator (3), see fig. (A).
When the mouth gets onto the shaft lug, the pin will
automatically slide into the lug of the connected trailer.
You can lower the hitch pin (2) manually by moving the
lever (1) in the arrow (b) direction. The insertion of the pin
is signalled by the retracted indicator (3), see fig. (B).
After the attachment of the trailer you must
always check whether the indicator (3) is retracted in
accordance with fig. (B).
Swing drawbar
The draw rod can transversely be set to five positions.
You fix it in a given position using a clip.
Modular system of hitches for trailers and semi-trailers
Module types:
Fig. (B) - Swinging draw-bar console
Fig. (C) - Swinging draw-bar console with a fixed pin
Fig. (D) - Console with a ø 80 ball
Disassembly, fig. (A):
1 - Remove the locking screw (1).
2 - Secure the module against sinking, release and
disassemble the pins (2).
3 - Slide the module out of the console downwards.
Do the assembly in the reverse order.
Swinging draw-bar console module
The swinging draw-bar console module is located in the
stage hitch console.
Swinging draw-bar
Disassembly:
1 - Release and remove the pins (1).
2 - Slide the swinging draw-bar out in the arrow direction.
Do the assembly in the reverse order.
TRANSPORT USE
98
E304
F15N034
D204
D205
Advertisement
Table of Contents
