Used operation liquids and filling - quantities
Designation
Brake liquid
Coolant
Engine oil
Hydrostatic steering oil
Oil of the front driving axle box
Oil of the planetary reducers of the front driving axle
Gearbox and final drive housing oil
Front PTO gearbox oil
Urea
Fue
*- This is the standard filling of the gearbox and final drive housing. Depending on the type of work and use
of the tractor (on a slope, on a level ground, etc.) the gearbox filling should be increased (see chapter
Hydraulic system; part Oil quantity drawn from outer hydraulic outlets of this Operator's Manual). The first
filling of the gearbox and final drive housing requires an approx. 4l higher quantity of oil.
The manufacturer does not take responsibility for any damages caused by the usage of
service fillings that do not comply with requirements stated in this service manual.
ZETOR service fillings
To maintain best operational characteristics of your tractor, original operational Zetor fillings are
recommended to be used.
Motor oils
Engine oil Zetor 15W40 L-SAPS
Oil in the gearbox and final drivehousing
Oil for gearing mechanisms of tractors ZETOR 80W
Oil for the front driving axle
Oil for the front axle ZETOR LS 80W
Oil for the hydrostatic steering of the tractors
Hydraulic oil ZETOR HM 32
Specification of oils for Zetor engines equipped by diesel particle filter
Classification ACEA Viscosity class SAE
E9/E7
Specification of oil for tractor transmission devices
Viscosity class
Performance class API
SAE
80W
GL-4
TRACTOR MAINTENANCE
15W-40
Quantity in litres
0,5
20,5
10
2,7
6,5
2x0.6
52*
2,7
30
230
Performance class API
API CJ-4/SM
156