Weight Of The Front Three-Point Hitch; Valve For Filling Tyre Tubes With Liquid; Procedure Of Filling The Tyres With Liquid - Zetor Forterra CL 100 Operator's Manual

*Weight of the front three-point hitch

Material Weight mass
(kg)
Cast-iron 460
Concrete 800

Valve for filling tyre tubes with liquid

All the tubes of the rear wheels are equipped with a valve
that makes it possible to fill the tubes with liquid with the
use of an adapter.
Filling the tubes of the front tyres and double
mounting of the rear wheels with liquid is not
permitted.

Procedure of filling the tyres with liquid

1. Unload the tyre by lifting the tractor and turn it with the valve upwards (A).
2. Deflate the tyre and unscrew the valve insert.
3. Screw the adapter for water filling on and attach the liquid supply hose to it.
4. Fill the tyre with the prescribed quantity of liquid.
5. For the filling you can use a gravity tank (B) or you can fill the tyre under pressure (C).
6. Remove the hose and unscrew the adapter for water filling.
7. Screw on the valve insert and inflate the tyre to the prescribed pressure.
8. After inflating screw the protective cap on the valve.
9. Fill the other tyre in the same way.
Water must not freeze in a tyre!
BALLAST WEIGHTS
F226
140
E552a
F_02_109