Immediately After Cooling The Cabin; Air-Condition And Heating Registers (A); Front Windshield (B) Defrosting - Zetor Forterra CL 100 Operator's Manual

ACQUAINTANCE WITH TRACTOR

Immediately after cooling the cabin

Immediately after cooling the cabin and lowering the inner
temperature on the required values, we recommend the
following:
- Switch over the control of air circulation (D) from position
(b - air re-circulation) to position (a - outer air suction)
- Do the continuous regulation of the air temperature with
air condition on by opening the heating valve (A). The air
entering the cabin from expiration is not so intensively
dried with this setting.
- Continuous temperature control with air-condition on can
be also done by lowering the output of ventilator by
switching the control (B) to position 1 or 2.
F_02_20

Air-condition and heating registers (A)

F13BN010
Positionable heating and * air-condition registers, front (A), rear (B).

Front windshield (B) defrosting

To ensure quick defrosting of the front windshield direct
the central heating outlets (1) under the angle of approx.
45° towards the windshield. Direct the side outlets (2)
under the angle of approx. 45° to the cab corners.
After defrosting of the front windshield direct the side
outlets to the side glasses of the doors as necessary and
gradually defrost them. After defrosting direct the outlets in
such a way that the air should not be blown directly to the
driver, but down to the driver's legs.
F13BN011
40