Rear Pto Shaft Revolutions Preselection Lever; Standard And Economical Independent Revolutions Of Rear Pto Shaft - Zetor Forterra CL 100 Operator's Manual

Rear PTO shaft revolutions preselection lever

The tractor may be equipped with one of two systems of rear PTO shaft revolutions preselection. The system
used in the tractor is marked on the label placed by rear PTO shaft revolutions preselection lever.
1. Standard and economical independent revolutions of rear PTO shaft - label (1)
2. Dependent and independent revolutions of rear PTO shaft - label (2)
Rear PTO shaft revolutions preselection lever (3) is located on the right side of driver's seat.
Independent rear PTO shaft revolutions - number of revolutions is dependent on the number of engine
revolutions.
Dependent rear PTO shaft revolutions - number and the direction of revolutions is dependent on the
engaged gear and reversing lever position.

Standard and economical independent revolutions of rear PTO shaft

The system used in the tractor is marked on the label placed by rear PTO shaft revolutions preselection
lever.
This system has only independent revolutions of rear PTO shaft.
A - Standard PTO shaft revolutions engaged
N - Neutral position (rear PTO shaft end-point can be spun freely)
B - Economical revolutions of PTO shaft engaged
With engaged standard PTO shaft revolutions (A), one can engage 540 or 1000 revolutions of rear PTO
shaft on the right side of the cab column by the revolutions selection switch.
With engaged economical PTO shaft revolutions (B), the switch of rear PTO shaft revolutions preselection on
the right column of the cab can be used to engage 540E or 1000E rear PTO shaft revolutions.
The lever is placed on the right side of driver's seat. After shifting the lever, it is necessary to lift collar in the
direction of the arrow (C).
DRIVE OF FARMING MACHINES
FH13N005
FH13N006
104