INSTRUMENT PANEL
Display - machined area
Machined area displays machined area in hectares in the
main displaying array, in the secondary displaying array
mean in hectares per hour.
It is necessary to set the width of the machined
area (i.e. working width of the tools) for the correct
calculation of machined area.
F15N028
Machined area menu
C15N100
Enter service menu by pressing (A) for a longer period of time. Select an item machined area marked with an
arrow (a) by (B) and (C) buttons. By pressing (A) button, you will enter the machined area (b) menu.
Machined area (b) menu:
(1) - setting the width of machined area (i.e. working width of tools)
(2) - start of machined area record
(3) - end of machined area record
(4) - erase recorded area from ECU
(5) - return to service menu
Machined area width
c15n104
Enter machined area menu. Select the item aggregation width marked with an arrow (a) by (B) and (C)
buttons and by pressing the button (A) shift to the menu aggregation width. There are three preset values of
aggregation width in aggregation width menu. Select the required aggregation width by (B) and (C) buttons
and confirm by pressing (A) button. Select an item (1) by (B) and (C) buttons and press (A) button for return
to machined area (a) menu.
58