Warning Indicator Lights - Zetor UTILIX CL Operator's Manual

Warning Indicator Lights

Turn signal lamp
High beam lamp
Low beam lamp
Fuel empty warning lamp
PTO monitor lamp This lamp will turn on when PTO is engaged.
Parking brake lamp This comes on when parking brake is engaged.
Glow signal lamp This lamp indicates pre-heating.
Charge lamp This lamp will go off as soon as the engine starts to run to indicate that the alternator is
charging (Please note, as broken fan belt can cause the light to come on, please stop the engine as
overheating can occur if not rectified immediately).
Oil pressure lamp This lamp will go out as soon as the engine starts if the oil pressure is correct. If it
comes on while the engine is running, stop the engine and get expert advice.
Coolant temperature warning lamp This comes on when engine is overheated.
Water in fuel warning lmap When a certain amount of water is collected in the fuel filter, this lamp
comes on. In this case, stop the engine and drain water from the fuel filter as soon as possible.
Air cleaner filter contamination indicator This comes on when the air cleaner is clogged by foreign
materials.
DPF Regeneration IndicatorThe indicator light is on when DPF regeneration is in progress. Do not
perform any work during regeneration
42
TRACTOR CONTROLS
UCLS5N002