Information For The Devicenet Master; Creating Eds Stub File For Cbd - Siemens SIMOVERT FC Series Operating Instructions Manual

Master Drives
CBD
01/23/98
5.3

Information for the DeviceNet master

5.3.1

Creating EDS Stub File for CBD

The following information is required for a user to create an EDS stub file for the CBD. Depending on the
management software used, portions of this information can be obtained directly from the CBD through DeviceNet™
communications.
Vendor ID: 145
Vendor Name: Siemens Energy & Automation
Device Type: Communication Adapter
Product Code: 1
Product Name: Siemens CBD
Major Revision: (must be obtained from CBD using DeviceNet™ communications)
Minor Revision: (must be obtained from CBD using DeviceNet™ communications)
Catalog Number: MFLB 6SE7090-0XX84-0FK0
Strobed Connection: (Normally turn off Enable on Strobed for PLC scanners because Poll and Strobe cannot be
turned on/off in ladder logic. The CBD does support Strobed for other applications)
o
Enable
Input Size: 8
Output Size: 8
Polled Connection:
þ
Enable
Input Size: 8
Output Size: 8
COS/Cyclic Connection:
o
Enable
Input Size: 0
Output Size 0
40 character description: CBD - Master Drive Communication Board
48
5 Start-up
5.3 Information for the DeviceNet master
5.3.1 Creating EDS Stub File for CBD
Bytes
Bytes
Bytes
Bytes
Bytes
Bytes
SIMOVERT MASTER DRIVES
Siemens AG 477 759 4070 76 J AA-74
Betriebsanleitung / Operating Instructions