General Information - Siemens ULTRAMAT 6 Series Compact Operating Instructions

Introduction
1.3 General information
Table 1-2 Rack-mounted analyzers of Series 6 approved for operation in hazardous areas
Certificate
TÜV 02 ATEX 1873 X
FM 3018862
FM16US0375X
CSA 1526660 (CAN/US) Class I, DIV 2, ABCD, T4, Ta= 45°C
FM3016050
FM16US0376X
CSA 1526657 (CAN/US) Class I, DIV 2, ABCD, T4, Ta= 45°C
Figure 1-4
1.3

General information

This device left the factory in a safe and proper condition and has been tested. In order to
maintain this condition and to ensure safe operation, it should only be used in the manner
described by the manufacturer. Furthermore, proper transportation, storage, installation,
operation and maintenance of the device are vital for ensuring correct and safe operation.
This manual contains the information required for the intended use of the described product.
It is addressed to technically qualified personnel who are specially trained or who have the
relevant knowledge of automation technology (measuring and control systems).
Knowledge and technically correct implementation of the safety notes and warnings
contained in this manual are required for safe installation and commissioning, as well as
for safety during the operation and maintenance of the described product. Only qualified
8
Ex type of protection
II 2/3 G Ex ec nC IIC T4 Gb/Gc
NI/ CL I / DIV2 / ABCD / T4, Ta= 45°C
IP20
Class I / Zone 2/IIC/T4, Ta=45°C IP20
IP20
Class I, Zone 2 Ex nA IIC T4, Ta=45°C
IP20
NI/ CL I / DIV2 / ABCD / T4, Ta= 45°C
IP20
Class I / Zone 2/IIC/T4, Ta=45°C IP20
IP20
Class I, Zone 2 Ex nA IIC T4, Ta=45°C
IP20
Example of additional label FM/CSA series 6
Device MLFB no.
CALOMAT 6E 7MB252x-xxx0x-xABx-Z xxx
CALOMAT 6E 7MB252x-xxx0x-xADx-Z xxx
CALOMAT 6E 7MB252x-xxx0x-xADx-Z xxx
ULTRAMAT 6E OXYMAT 7MB212x-xxxx0-xxxx-Z E20
6E
7MB202x-xxxx0-xxxx-Z E20
ULTRAMAT 6E OXYMAT 7MB212x-xxxx0-xxxx-Z E20
6E
7MB202x-xxxx0-xxxx-Z E20
Compact Operating Instructions, 01/2024, A5E45779144002-AB
Series 6 and ULTRAMAT 23