Manitou MRT 2150 Privilege Plus ST4 S2 User Manual page 156

Crane
Hide thumbs Also See for MRT 2150 Privilege Plus ST4 S2:
Table of Contents

Advertisement

IT
- controllare lo stato della fune B (Fig.3)
e il corretto avvolgimento sul tambu-
ro A (Fig.3);
- controllare il corretto movimento ro-
tazione delle pulegge di guida fune
F1 (Fig.2 e 4);
- controllare lo stato del capocorda C
(Fig.3);
- veri care l'integrità del bozzello F
(Fig.4)
- veri care lo stato del gancio K (Fig.4):
che non sia deformato, che ruoti libe-
ramente e che la linguetta di sicurez-
za sia e ciente K1 (Fig.4);
- controllare l'aggancio del braccetto
alla macchina operatrice J (Fig.5).
Dalla posizione di parcheggio è possi-
bile sganciare il piede di appoggio e
posizionarlo all'interno del braccetto
per operare senza ulteriori ingombri J1
(Fig.5).
A
F1
F
K
K1
K
4
EN
- check the condition of the rope B (Fig.
3) and that it is wound correctly on
the drum A (Fig.3);
- check to ensure correct rotation mo-
vement of the rope guide pulley F1
(Fig. 2 and 4);
- check the condition of cable terminal
C (Fig. 3);
- check the integrity of the block F
(Fig.4)
- check the condition of the hook K (Fig.
4): to make sure it is not deformed,
that it rotates freely and that the sa-
fety tab K1 (Fig. 4) is in working order;
- check the hook-up of the boom to the
operating machine J (Fig. 5).
From the parking position it is possible
to unhook the foot and position it insi-
de the boom to operate without incre-
asing the dimensions J1 (Fig.5).
C
B
3
J1
2-116
2-116
www.duma-rent.com
FR
- contrôler l'état du câble et s'il s'en-
roule correctement sur le tambour A
(Fig. 3) ;
- contrôler si le mouvement de rotation
des poulies de guidage du câble F1
(Fig. 2 et 4) est correct ;
- contrôler l'état des embouts du câble
C (Fig. 3) ;
- contrôler que la manille de jonction
câble et crochet est bien vissée K
(Fig.4) et que les attaches K1 (Fig.4)
bloquent le câble.
- véri er l'état du crochet : il ne doit pas
être déformé, il doit tourner libre-
ment et sa languette de sécurité doit
être e cace G (Fig. 4) ;
- contrôler l'attache du bras à la ma-
chine opérationnelle J (Fig. 5).
Depuis la position de stationnement il
est possible de décrocher le pied d'ap-
pui et de le placer à l'intérieur du bras
pour travailler sans encombrements
ultérieurs J1 (Fig.5).
J
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mrt 2550 privilege plus st4 s2Mrt 3255 privilege plus st4 s1

Table of Contents