Table of Contents
Advertisement
Question 17
Are you willing to make the facilities changes needed to support the ATX?
Anything Else?
Here's Why We're Asking:
Examples of facilities changes may include but are not limited to the following:
•
Curtains or shades may have to be added to the windows.
•
If the power requirements are not met, it may be necessary to run new circuits to the room. All circuits used for
the ATX must be wired to the same electrical panel to ensure common ground.
•
The back wall may have to be painted or covered.
•
Floors may have to be carpeted.
•
Ceilings may have to change, depending on the material and height.
•
Lighting may have to be changed.
•
Acoustical wall coverings may have to be added.
•
Network connections and phone jacks may have to be added.
About the Network
Polycom, Inc.
This section asks questions that will help you determine if the network at the
proposed ATX site is adequate or if changes need to be made prior to
installation. Each question has an "Anything Else?" row where you can add
additional information you think might be helpful for Polycom to know.
Note that you may need the help of the network administrators to answer
these questions. Polycom recommends that the network administrators read
these documents prior to installation:
•
Supporting Real-time Traffic: Preparing Your IP Network for Video
Conferencing, available at
/resources/white_papers/index.html.
•
Preparing Your IP Network for High Definition Video Conferencing, available
at
http://www.polycom.com/global/documents/services/professional
_services/high_definition_readiness_services/whitepaper_preparing_
your_ip_network_for_hd_video_conferencing.pdf.
http://www.polycom.com/products
Preliminary Site Information
Yes
No
A–7
Advertisement
Table of Contents
