Preparing For The Camera Alignment In An Atx 400 Room; Figure 5-8 Location Of Displays And Seats - Atx 400 System - Polycom ATX 200 Integrator Manual

Polycom ATX Integrator's Guide

Preparing for the Camera Alignment in an ATX 400 Room

5 - 12
The ATX 400 system has four codecs, four displays, and four cameras. As you
are seated in the room facing the displays, the displays are designated outer
left, center left, center right, and outer right. Each camera is connected to a
particular codec, and each codec is connected to a particular display as
described in the following table.
Camera
Camera Location
Camera-3 Outer left
(B3) display
Camera-2 Center
(B2) right
display
Camera-1 Center left
(B1) display
Camera-4 Outer right
(B4) display
The ATX 400 table has eight seats facing the displays. These seats are
numbered 1 through 8, from left to right, as you are facing the displays.
Cam-3
(B3)
Outer Left Display Center Left Display
2
1 3
Figure 5-8 Location of Displays and Seats — ATX 400 System
Display on
which Video
Appears Codec
Outer right 3 (Right)
display
Center left 2 (Secondary)
display
Center right 1 (Primary)
display
Outer left 4 (Left)
display
Cam-1 Cam-2
(B1) (B2)
Center Right Display
4 5
Seating Position
the Camera
Normally Points
to
1 and 2
5 and 6
3 and 4
7 and 8
Cam-4
(B4)
Outer Right Display
6 8
7
Polycom, Inc.