Table of Contents
Advertisement
Polycom, Inc.
Camera
Camera
Location
Camera-1
Center
(B1)
display
Camera-2
Right
(B2)
display
Camera-3
Left
(B3)
display
Note that this guide uses Primary, Secondary, Left, and Right to describe the
codecs. For ATX SDK version 3.0.3, the codecs are typically described as
Master and Slaves; however, only the terms Primary, Secondary, Left, and
Right are used in this guide.
The ATX 300 table has six seats facing the displays. These seats are numbered
1 through 6, from left to right, as you are facing the displays.
Cam-3
(B3)
Left Display
2
1
Figure 5-6
Location of Displays and Seats — ATX 300 System
As described in
Chapter 2,
where a conference participant is seated affects where and how they appear on the
displays at the far site. To ensure that the conference participants appear on the
displays, but do not appear on more than one display, you should place the chairs
at the proper locations at the table and mark those locations.
Configuring the Displays, Cameras, and Audio
Display on
which Video
Appears
Codec
Center display
1 (Primary)
Left display
2 (Left)
Right display
3 (Right)
Cam-1
(B1)
Center Display
3
4
"Installing the Displays, Table, Cameras, and Chairs,"
Seating Position
the Camera
Normally Points
to
3 and 4
5 and 6
1 and 2
Cam-2
(B2)
Right Display
6
5
5 - 9
Advertisement
Table of Contents
