Table of Contents
Advertisement
Polycom ATX Integrator's Guide
Placing the Chairs
2 - 12
As shown in
Figure
2-2, where a conference participant is seated affects where
and how they appear on the displays at the far site. To ensure that the
conference participants appear on the displays, but that they do not appear on
more than one display, you should place the chairs at the proper locations at
the table and mark those locations.
To help participants keep their chairs at the proper locations at the table,
Polycom recommends that you use one or more of the following visual or
physical markers:
•
Place placemats on the tabletop at each of the proper chair locations.
•
Mark the tabletop or the floor to indicate where the chairs should be
positioned.
•
Attach barriers under the table so that the participants cannot physically
move their chairs to an incorrect location.
Additionally, the chairs you select must not exceed the following dimensions:
•
Arm span: 24½" (62.2 cm)
•
Wheel base: 27" (68.6 cm)
Polycom, Inc.
Advertisement
Table of Contents
