Polycom Salmon Arm S203 Field Manual

Field Guide to Videoconferencing

Salmon Arm S203

Making a videoconference call

Pick up the Polycom remote (which should be

sitting in on the table with the Elmo, DVD/VCR

and computer.

Position the TV on the cart and turn on the TV.

If, for some reason, the Polycom system is turned off, its power

switch is on the back of the unit.

Press the Call/Hang up button on

the top of the remote and look

for this screen on one of the TVs.

Use the arrows on the remote to

navigate to the Address Book and

press the centre circle to choose

that selection.

Use the arrows to scroll to the site you want to

dial and use the centre circle to choose that

selection.

To adjust the cameras in this room use the

Polycom remote. Point the remote at the camera

unit on top of the TV. Press the remote button

labeled Near. Then use the arrows to position and

zoom your camera.

All manuals and user guides at all-guides.com

Table of Contents

Do you have a question about the Salmon Arm S203 and is the answer not in the manual?

Page 1 Elmo, DVD/VCR and computer. Position the TV on the cart and turn on the TV. If, for some reason, the Polycom system is turned off, its power switch is on the back of the unit. Press the Call/Hang up button on the top of the remote and look for this screen on one of the TVs.
Page 2 There is a microphone built into the camera unit on top of the TV and there are 4 microphones in the ceiling. There is a mute button on the Polycom remote which will turn off the microphones in this room so no one can hear you.