Table of Contents
Advertisement
Polycom ATX Integrator's Guide
5 - 26
Select the Camera Matching tab.
3
The following illustration shows the Camera Matching tab for an ATX 300
system.
Figure 5-24
Click Codec 1.
4
An orange border appears around the selected codec.
Click Set ATX Defaults, and then wait for the camera settings to be
5
updated.
If the camera image looks too bright or too dim, adjust the gain in the
6
Gain field, but do not set the gain below 0db.
If you set the gain to 0db, but the camera image still looks too bright,
7
adjust the iris down in the Iris field.
If needed, adjust the focus:
8
Set the Focus field to a value that results in a sharply focused view.
a
Move a chair between seats 3 and 4 and then place the gray card on the
b
arms of that chair.
Telepresence Tool Camera Matching Tab
Polycom, Inc.
Advertisement
Table of Contents
