Table of Contents
Advertisement
Polycom ATX Integrator's Guide
5 - 4
Click Display Alignment.
5
The display alignment pattern appears on the screens.
Figure 5-3
The display alignment pattern should align with the edges of each screen.
6
If it does not, check the display settings and ensure that the display is set
to a mode (such as dot-by-dot mode) where no scaling is done to the
incoming image.
Access the settings for each display and configure the following:
7
Set the Standby setting so that the display goes into Standby mode
a
when no video is received.
Note that the name for this setting varies depending on your brand of
display. Besides Standby, some common names for this setting
include Sleep, Sleep Timer, Power Save, and Power Management.
If possible, disable all the onscreen menus and alerts (such as "No
b
Signal" and "Video Input 2").
Display Alignment Pattern
Polycom, Inc.
Advertisement
Table of Contents
