Polycom ATX 200 Integrator Manual page 41

Polycom, Inc.
Left Display
To Primary Codec
When you install tabletop microphones, you should place them on the table in
the positions shown in
microphone points away from the displays as shown in
achieve the best imaging, you should keep the microphones from rotating out
of position. To do so, you may want to consider detenting the microphones.
Additionally, you may want to add holes or channels to the table to hide the
cables.
Center Display
Note: Wiring is shown with the microphones connected
to the right c-link2 port. The Polycom logo on the microphones
must be pointed away from the displays.
Figure 3-15 Tabletop Microphone Placement
Figure 3-15. Make sure that the Polycom logo on each
Figure 3-16 Tabletop Microphone Orientation
Installing the Remaining Electronic Components
Right Display
Figure 3-16. To
3 - 13