Polycom ATX 200 Integrator Manual page 61

Polycom, Inc.
The following table shows how the cameras are positioned differently for
different call scenarios. It also indicates how many codecs are in the call.
Number of
Codecs in
the Call Scenario
2 Call ATX 200,
TPX HD
204M, or RPX
HD 200 Series
system
1 Call stand-
alone video
conferencing
system
2 Multipoint call
(Continuous
Presence)
2 Multipoint call
(VARS)
To prepare for the camera alignment in an ATX 200 room:
Click the Display tab in the Telepresence Tool application.
1
If the displays are not showing the video from the cameras:
2
— For ATX SDK version 3.0.3, press the button preconfigured to show
the display.
— For ATX 300 version 3.0.3, access the Admin screen on the Polycom
Touch Control or on the Crestron Touch Panel, and then press Show
Display.
Click Camera Alignment.
3
Colored lines appear on all display screens. You will use the yellow and
blue lines, but not the other colors, for the ATX system.
Configuring the Displays, Cameras, and Audio
Preset Camera-1
Number (B1) View
99 Seats 1 and 2
97 Seats 1
through 4
96 Seats 1
through 4
99 Seats 1 and 2
Camera-2 (B2)
View
Seats 3 and 4
Points towards
Seats 3 and 4.
Note, however, that
the codec for this
camera is not
connected to the far
site, therefore no
video is sent and the
near site display
remains black.
Seats 1 through 4
Seats 3 and 4
5 - 7